Yes it can, but you must tell us you want Tip-Out-Trays by using KCD's Options. If you open the Base Sink Cabinets dialog box by double clicking on the Base Sink Cabinet and clicking the More button:
Then you will see the Options button, click on that:
Then select the "Tilt Out Sink Tray" option (it should be highlighted in blue when selected), and Click OK:
This will change the way we machine this cabinet, and how you will Assemble the cabinet. Without the Option, our sink cabinet has a vertical Base Sink Rail that is the height of your chosen false front height, plus your top reveal, plus 20 mm (3/4"). The additional 20 mm or 3/4" is for the doors below to have something to close against. By not having horizontal rails, there is nothing that has to be cutout to make room for the sink. The cabinet without the "Tilt Out Sink Tray" option will look like this:
If you do choose the "Tilt Out Sink Tray" Option, then instead of the approximately 180 mm (7") tall vertical Base Sink Rail, we will machine two 50.8 mm (2") vertical Base Sink Rails, and eliminate the Lamello machining (since a Lamello P14 Tenso fitting is too big to be utilized) and simply machine a couple pilot holes for each Base Sink Rail, and you can attach it by using #6 1-1/2" self tapping, self countersinking wood screws. The cabinet with the "Tilt Out Sink Tray" option will look like this:
The top edge of the lower Base Sink Rail should align with the bottom of your False Front. So, if you have our default False Front height of 157 mm (6- 3/16"), and our default 3 mm (1/8") top reveal, then the top edge of the lower Base Sink rail should be located at 160 mm (6- 5/16") down from the top edge of the cabinet side.