Links
  • Compare ()
  • Sign In
  • Create an Account
Menu
Account
Toggle Nav
Cart 0 Shopping Cart

What are the general specifications for Full Access Cabinetry?

General Information

Cabinets are available in 0.1mm (.001") increments.

Choose either pre-finished maple UV interior, or unfinished (raw) interior (species available listed below). All supplied parts, including Back panels, are 3/4" thick.

Cabinet box plywood is light color domestic hardwood unless otherwise specified.

Back panel has an optional 10mm (.3937") scribe between the back and the wall (to accommodate Suspension System and allow scribing cabinet to fit wall irregularities).

Shelves are sized 3mm (1/8") less than the total inside width for easy adjustment.

Cabinets with Adjustable Shelves have the side panels bored for 5mm shelf pins on 32mm centers(pins not included), these 5mm shelf holes are in pods of 5 holes.

Cabinet Components are available in the following wood species:

  • UV (Clearcoat) Hard Maple
  • UV (Clearcoat) Natural Birch
  • RAW Alder
  • RAW Cherry
  • RAW Hard Maple
  • RAW Hickory
  • RAW Red Oak
  • RAW Walnut
  • RAW White Oak
  • White Melamine
  • Fog Gray Melamine
  • Hard Rock Maple Melamine
  • Select offering of Stevens Wood TFLs with wood grain and solid colors available
  • Select offering of Formica Fenix solid color TFLs

*See next subsection in FAQs for general information regarding materials.

Related Questions:

  1. Disclaimer about Available Materials
  2. Plywood Material Options
  3. Melamine Material Options
  4. NEW StevensWood Material Options
  5. NEW Formica Fenix Material Option
  6. Do you have written instructions on how to install Full Access Cabinetry?
  7. Why should I use the metric measuring system?
  8. What is the 32mm System?
  9. Why are your Wall Cabinets defaulted at 13" (330mm) deep?
  10. Why should I try to stay in system?
  11. What are the advantages and disadvantages of Applied Ends versus Integral Finished Ends
  12. * How does the Full Access Oven Cabinet work?
  13. * How does the Full Access Blind Corner Cabinet work?
  14. * How does the Full Access Angled Cabinet work?
  15. * How does the Full Access Clipped Cabinet work?
  16. Do you have Face Frame cabinets?
  17. How to Order
  18. Item Selection and Building a Project
  19. Ordering your Project
  20. What are Presets?
  21. How do I "Manage Presets"?
  22. Door / Fronts Type Selection
  23. Door / Fronts Style
  24. Door / Fronts Edgeband
  25. Door / Fronts Grain Direction
  26. Carcass Material
  27. Construction Method
  28. Front Carcass Edgeband Selection
  29. Shelf Edgeband Selection
  30. Exterior Parts Material
  31. Sides Material (Finished Ends Only)
  32. Top Drawer Front Height
  33. Drawer Box Selection
  34. Drawer Box Material
  35. Adjustable Shelf Holes
  36. Toe Selection
  37. Toe Kick Height
  38. Toe Kick Depth
  39. Edgeband Top/Btm of Sides
  40. Hinge Placement
  41. Mid Stretcher Position
  42. Reveals
  43. Bottom Recess Selections
  44. What edges do you edgeband?
  45. What edgeband options do you offer?
  46. What edgeband color matches your melamines?
  47. How big is the pallet my parts will be shipped on?
  48. * What is the best way to check-in my Cabinotch Component parts?
  49. How does your standard base cabinet end panel layout?
  50. * Which Lamello P-14 Fastener goes where?
  51. Do I need to glue the joints when assembling these Full Access Cabinets?
  52. What screws should I use to assemble my cabinets?
  53. Are there any specialty tools I will need to assemble my Cabinotch Full Access Cabinetry?
  54. * What is the best assembly sequence for Cabinotch Full Access Cabinetry?
  55. Why are there 15mm holes in the bottom of my Base Diagonal and Piecut Corner Cabinets?
  56. How do I assemble my Base Piecut Corner Cabinets?
  57. Why is there a 10mm (approximately 3/8") space behind my Full Access cabinet backs?
  58. Why should I use Leg Levelers?
  59. Why should I use the Suspension System for my Upper Cabinets?
  60. Where do I locate the Suspension Rail on the wall for my Upper Cabinets?
  61. Where do I bore my Hinge Holes in my Doors?
  62. Do I have to use any particular brand of Hinge?
  63. What Hinge and Hinge Plate should I use?
  64. How many Hinge Plates will you machine for?
  65. What are my Drawer Guide options?
  66. Where are the Drawer Guide holes located?
  67. Where do I position my Drawer Fronts on my Drawer Boxes?
  68. How deep (front to back) will my Drawer Boxes be?
  69. What height Drawer Box will my cabinets have if I purchase my drawer boxes from Cabinotch?
  70. Current Release V3.02 - 4.13.23
  71. Previous Release V2.0 - 10.26.21
  72. BETA Release V1.0 - 4.28.21
FAQ Categories
  1. FAQ-Face Frame Cabinetry-KCD (30)
  2. FAQ-Face Frame Cabinetry-Webstore (41)
  3. FAQ-Full Access Cabinetry-KCD (62)
  4. FAQ-Full Access Cabinetry-Webstore (73)
  5. FAQ-WebStore (7)
  6. FAQ-Drawer Boxes (8)